RS 50 FOUR

Specification

• Capacity:

  (Grids holders and grids not supplied)
  Oven loaders compatibility GN1/1 type RATIONAL 6 and 10 levels
  Other oven type, consult us

• Blast Chilling:

  50 kg, cycle 110 min
  40 kg, cycle 90 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 tray, 5 kgs per level. TT°C reached : in blast chilling +63°C to +10°C core, +3°C product average.
  ACFRI Test capacity obtained with an higher loading than the NF Standard (in compliance with real work conditions in kitchens).

• Deep Freezing:

  20 kg, cycle 120 min, raw meat 4cm thick deep freezing : from +3°C to -18°C core T°C.
  20 kg, cycle 4H50, mashed potatoes deep freezing (ACFRI test), +63°C to -18°C to core.

Technique

• Evaporator(s):

  2 verticals - type ventilated

• Fan(s):

  2 reinforced fans

• Condensing unit (CU):

  R452A Condensing unit (CU) 1,6 cv X air-cooled Low GWP gas compliant, new 2020 standard

• Refrigerating power in watts:

  2 492 Watts at -10°C / 1 767 Watts at -20°C / 636 Watts at -40°C

• Electric supply to install in Amperes:

  Cell : 10

• Voltage and Frequency:

  Mono 230 V + T; 50 Hertz

Caractéristiques

• Outer dimensions in mm:

  L 755 x D 800 x H 1800

• Inner working dimensions in mm:

  L 420 x D 635 x H 785

• Weight in kg:

  160

• Hinges:

  Right (reversal on demand)

• Inner/outer finish:

  Stainless steel.

Téléchargements

Available Options

CELL OPTIONS Defrosting waters collecting tray Defrosting waters evaporating tray Castors x 4 (2 with brakes) Mini feet, cell’s heigt 840 mm Stainless steel back sheet Connect easy (toolless core probe connector) Additionnal standard grid holder (the pair) Standard grid holder replacement by reinforced holder (special heavy load), the pair Additionnal reinforced grid holder (special heavy load), the pair Lock Control panel on top (H. 35mm) Protection grid against rodent

CONTROLLER OPTIONS Thawing mode Printer + USB output SIMPLY USB option (USB output + 1 supplied key) Additionnal USB key 2 GB / FAT32 List management mode (only with USB and/or Printer options) Quick setting mode (only with USB option) 2 probes display 4 probes display Automate SIMPLY III + core probe BI -CONNECT core probe (*connexion to the existing recorder PT100 or PT 1000) BI -CONNECT room probe (*connexion to the existing recorder PT100 or PT 1000) Simply’Touch + 1 key + 1 on/off switch with thermoplastic Housing IP65

ACCESSORIES Grid GN 1/1 (530 x 325) Aluminium + silicone plate (non-skid) grid 600 x 400

Tweet