RS 100 Spé

Specification

• Capacity:

  DELIVERED AND MOUNTED
  (Grids not supplied)
  Compatibility GN 2/1 and 600 x 800
  10 pairs of 3 points renforced grid holders included, GN 2/1 format

• Blast Chilling:

  100 kg from + 65°C to + 10°C core cycle 110 min. <

  100 kg, ciclo de 110 min,
  70 kg, ciclo de 90 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 tray, 5 kgs per level. TT°C reached : in blast chilling +63°C to +10°C core, +3°C product average.
  ACFRI Test capacity obtained with an higher loading than the NF Standard (in compliance with real work conditions in kitchens).

  /> 70 kg from + 65°C to + 10°C core cycle 90 min.

• Deep Freezing:

  40 kg, ciclo de 120 min, raw meat 4cm thick deep freezing : from +3°C to -18°C core T°C.
  40 kg, ciclo de 4H50, mashed potatoes deep freezing (ACFRI test), +63°C to -18°C to core.

Technique

• Evaporator(s):

  2 vertical - type ventilated

• Fan(s):

  3 reinforced fans

• Condensing unit (CU):

  R452A Condensing unit (CU), 4 cv X air-cooled Low GWP gas compliant, new 2020 standard

• Refrigerating power in watts:

  8 412 Watts at -10°C / 5 635 Watts at -20°C / 2 141 Watts at -40°C

• Electric supply to install in Amperes:

  Cell : 10,5

• Voltage and Frequency:

  Tri 400 V + T+ N 50 Hertz

Caractéristiques

• Outer dimensions in mm:

  L 1 050 x D 1 055 x H 1 910

• Inner working dimensions in mm:

  L 625 x D 800 x H 1 160

• Pitch between 2 levels in mm:

  70 mm for 10 levels (35 mm for 19 levels)

• Weight in kg:

  215

• Hinges:

  Right (reversal on demand)

• Inner/outer finish:

  Stainless steel.

Téléchargements

Available options

CELL OPTIONS Defrosting waters collecting tray Defrosting waters evaporating tray Castors x 4 (2 with brakes) Mini feet, cell’s heigt 840 mm Stainless steel back sheet Connect easy (toolless core probe connector) Additionnal standard grid holder (the pair) Standard grid holder replacement by reinforced holder (special heavy load), the pair Additionnal reinforced grid holder (special heavy load), the pair Lock Control panel on top (H. 35mm) Protection grid against rodent

CONTROLLER OPTIONS Thawing mode Printer + USB output SIMPLY USB option (USB output + 1 supplied key) Additionnal USB key 2 GB / FAT32 List management mode (only with USB and/or Printer options) Quick setting mode (only with USB option) 2 probes display 4 probes display Automate SIMPLY III + core probe BI -CONNECT core probe (*connexion to the existing recorder PT100 or PT 1000) BI -CONNECT room probe (*connexion to the existing recorder PT100 or PT 1000) Simply’Touch + 1 key + 1 on/off switch with thermoplastic Housing IP65

ACCESSORIES Grid GN 1/1 (530 x 325) Grid GN 2/1 (530 x 650) Aluminium + silicone plate (non-skid) grid 600 x 400

Available options

CELL OPTIONS Defrosting waters collecting tray Defrosting waters evaporating tray Castors x 4 (2 with brakes) Mini feet, cell’s heigt 840 mm Stainless steel back sheet Connect easy (toolless core probe connector) Additionnal standard grid holder (the pair) Standard grid holder replacement by reinforced holder (special heavy load), the pair Additionnal reinforced grid holder (special heavy load), the pair Lock Control panel on top (H. 35mm) Protection grid against rodent

CONTROLLER OPTIONS Thawing mode Printer + USB output SIMPLY USB option (USB output + 1 supplied key) Additionnal USB key 2 GB / FAT32 List management mode (only with USB and/or Printer options) Quick setting mode (only with USB option) 2 probes display 4 probes display Automate SIMPLY III + core probe BI -CONNECT core probe (*connexion to the existing recorder PT100 or PT 1000) BI -CONNECT room probe (*connexion to the existing recorder PT100 or PT 1000) Simply’Touch + 1 key + 1 on/off switch with thermoplastic Housing IP65

ACCESSORIES Grid GN 1/1 (530 x 325) Grid GN 2/1 (530 x 650) Aluminium + silicone plate (non-skid) grid 600 x 400

Tweet