RS 100

Specification

• Capacity:

  DELIVERED AND MOUNTED
  (Grids not supplied)
  Compatibility GN 1/1 and 600 x 400
  20 pairs of 3 points renforced grid holders included

• Blast Chilling:

  100 kg, cycle de 110 min,
  70 kg, cycle de 90 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 tray, 5 kgs per level. TT°C reached : in blast chilling +63°C to +10°C core, +3°C product average.
  ACFRI Test capacity obtained with an higher loading than the NF Standard (in compliance with real work conditions in kitchens).

• Deep Freezing:

  40 kg, cycle de 120 min, raw meat 4cm thick deep freezing : from +3°C to -18°C core T°C.
  40 kg, cycle de 4H50, mashed potatoes deep freezing (ACFRI test), +63°C to -18°C to core.

Technique

• Evaporator(s):

  2 vertical - type ventilated

• Fan(s):

  3 reinforced fans

• Condensing unit (CU):

  R452A Condensing unit (CU), 4 cv X air-cooled Low GWP gas compliant, new 2020 standard

• Refrigerating power in watts:

  8 412 Watts at -10°C / 5 635 Watts at -20°C / 2 141 Watts at -40°C

• Electric supply to install in Amperes:

  Cell : 10,5

• Voltage and Frequency:

  Tri 400 V + T+ N 50 Hertz

Caractéristiques

• Outer dimensions in mm:

  L 750 x D 860 x H 2 080

• Inner working dimensions in mm:

  L 625 x D 435 x H 1 350

• Pitch between 2 levels in mm:

  60 mm for 20 levels (30 mm for 39 levels)

• Weight in kg:

  210

• Hinges:

  Right (reversal on demand)

• Inner/outer finish:

  Stainless steel.

Téléchargements

Available Options

CELL OPTIONS

• Defrosting waters collecting tray
• Defrosting waters evaporating tray
• Castors x 4 (2 with brakes)
• Stainless steel back sheet
• Connect easy (toolless core probe connector)
• Additionnal standard grid holder (the pair)
• Standard grid holder replacement by reinforced holder (special heavy load), the pair
• Additionnal reinforced grid holder (special heavy load), the pair
• Lock
• Control panel on top ( H. + 35 mm)
• Protection grid against rodent

ACCESSORIES

• Grid GN 1/1
• Grid GN 2/1
• Aluminium + silicone plate (non-skid) grid 600 x 400

CONTROLLER OPTIONS

• Double display and control (pass-through machines)
• Thawing mode
• Pinter + USB output SIMPLY
• USB option (USB output + 1 supplied key)
• Additionnal USB key 2 GB / FAT32
• List management mode (only with USB and/or Printer options)
• Quick setting mode (only with USB option)
• 2 probes display
• 4 probes display
• Automate SIMPLY III + core probe
• BI -CONNECT core probe (*connexion to the existing recorder PT100 or PT 1000)
• BI -CONNECT room probe (*connexion to the existing recorder PT100 or PT 1000)
• Offset housing enhanced sealing IP65 resin
• Offset housing enhanced sealing IP66 stainless steel
• Simply’Touch + 1 key + 1 on/off switch with thermoplastic Housing IP65
• Option thermoplastic Housing IP65 replacement by stainless stell Housing IP65
• Software + ethernet com box

Tweet