Ultra Performance Remote Air Cooled condensing unit

AR 80 P630 AR 80 P630

Specification

  • Capacity:

    (Trolley(s) not supplied)
    2 trolley(s) GN1 / 1 - 20 levels / 1 trolley(s) GN2 / 1 - 20 levels / 1 trolley(s) 600x400 - 20 levels
    Compatible with oven trolley(s) GN1/1 Capic, Frima, Rational, Bourgeois, Convotherm, Angelo Po, Unox.

  • Blast Chilling:

    80 kg, cycle 80 min
    110 kg, cycle 110 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 tray, 5 kgs per level. TT°C reached : in blast chilling +63°C to +10°C core, +3°C product average.
    ACFRI Test capacity obtained with an higher loading than the NF Standard (in compliance with real work conditions in kitchens).

  • Deep Freezing:

    50 kg, cycle 270 min, mashed potatoes deep freezing (ACFRI test), +63°C to -18°C to core.
    40 kg, cycle 120 mn, raw meat 4cm thick deep freezing : from +3°C to -18°C core T°C.

    • Compatible unit with R452A, R448A, R449A, R407F, R404A, fluids (CO2 consutl us)
    • Unit ordered without condensing unit (CU), brazed exp. valves and suction and liquid collectors supplied and mounted by yourself
    • Unit ordered with ACFRI Range X CU, brazed exp. valve(s) R452A and suction and liquid collectors supplied and mounted in our factory
    • Unit ordered with ACFRI Range N CU, brazed exp. valve(s) R448A, R449A and suction and liquid collectors supplied and mounted in our factory
    • For an R407F use, CU, brazed exp. valves and suction and liquid collectors to be supplied by yourself.

Technique

  • Evaporator(s):

    1 vertical - type ventilated

  • Fan(s):

    1 column ventil14 960 m3/h

  • Condensing unit (CU):

    R452A Condensing unit (CU)
    1 - RD Remote air-cooled cond. unit : 6 cv X without fairing
    2 - OL Water condensing unit : 6 cv X without fairing

  • Refrigerating power in watts:

    9 707 watts at -10°C / 6 554 watts at -20°C / 2 136 watts at -40°C

  • Electric supply to install in Amperes:

    Cell SG : 7A - GRD 6CV : 10.5A - Cell OL : 16A

  • Voltage and Frequency:

    Tri 400V + T + N 50 Hertz

Caractéristiques

  • Outer dimensions in mm:

    L 1 020 x D 1 145 x H 2 270

  • Inner working dimensions in mm:

    L 630 x D 1 005 (floor) x H 1 880

  • Hinges:

    Right (reversal on demand)

  • Inner/outer finish:

    Stainless steel.

Téléchargements

Request for quotation

If you would like a quote, please fill out this form. We will come back to you as soon as possible.

Available Options

     CELL OPTIONS

    • Defrosting waters collecting tray
    • Stainless steel back sheet
    • Connect easy (toolless core probe connector)
    • Lock
    • Stainless steel banner condensing unit cover
    • Additional door (through cell)
    • Bottom evaporator configuration

      CONTROLLER OPTIONS

    • Double display and control (pass-through machines)
    • Thawing mode
    • Pinter + USB output SIMPLY
    • USB option (USB output + 1 supplied key)
    • Additionnal USB key 2 GB / FAT32
    • List management mode (only with USB and/or Printer options)
    • Quick setting mode (only with USB option)
    • 2 probes display
    • 4 probes display
    • Automate SIMPLY III + core probe
    • BI -CONNECT core probe (*connexion to the existing recorder PT100 or PT 1000)
    • BI -CONNECT room probe (*connexion to the existing recorder PT100 or PT 1000)
    • Offset housing enhanced sealing IP65 resin
    • Offset housing enhanced sealing IP66 stainless steel
    • Simply’Touch + 1 key + 1 on/off switch with thermoplastic Housing IP65
    • Option thermoplastic Housing IP65 replacement by stainless stell Housing IP65
    • Software + ethernet com box

     ACCESSORIES

    • Trolley GN1/1 (422 x 576 x 1 816)
    • Trolley GN2/1 (629 x 694 x 1 816)
    • Trolley 600 x 400 (506 x 635 x 1 816)
    • Trolley 600 x 800 (698 x 844 x 1 816)
    • Grid GN 1/1 (530 x 325)
    • Grid GN 2/1 (530 x 650)
    • Grid 600 x 400
    • Aluminium + silicone plate (non-skid) grid 600 x 400 or GN1/1