10 to 19 Levels

GP 19 3 cv GP 19 3 cv

Specification

  • Capacity:

    (Grids not supplied)
    Compatibility GN 1/1 and 600 x 400
    10 pairs of 3 points renforced grid holders included

  • Blast Chilling:

    75 kg, cycle de 110 min,
    65 kg, cycle de 90 min, cooling of mashed potatoes in 5.5 cm thick GN1/1 tray, 5 kgs per level. T°C reached : in deep freezing +63°C to +10°C core, +3°C product average.
    ACFRI Test capacity obtained with an higher loading than the NF Standard (in compliance with real work conditions in kitchens).

  • Deep Freezing:

    20 kg, cycle 60 min, raw pastry 60g blast chilling (+ 20/ -18°C).
    35 kg, cycle 120 mn, raw meat 4cm thick blast chilling : from +3°C to -18°C core T°C.

Technique

  • Evaporator(s):

    2 verticals - type ventilated

  • Fan(s):

    2 reinforced fans

  • Condensing unit (CU):

    R452A Condensing unit (CU) 3 cv X air-cooled Low GWP gas compliant, new 2020 standard

  • Refrigerating power in watts:

    5 244 Watts at -10°C / 3 557 Watts at -20°C / 1 138 Watts at -40°C

  • Electric supply to install in Amperes:

    Cell : 18,5A

  • Voltage and Frequency:

    Mono 230 V + T 50 Hertz

Caractéristiques

  • Outer dimensions in mm:

    L 755 x D 800 x H 1 575 mm

  • Inner working dimensions in mm:

    L 625 x D 435 x H 785 mm

  • Pitch between 2 levels in mm:

    70 mm for 10 levels (35 mm for 19 levels)

  • Weight in kg:

    160

  • Hinges:

    Right (reversal on demand)

  • Inner/outer finish:

    Stainless steel

Téléchargements

Request for quotation

If you would like a quote, please fill out this form. We will come back to you as soon as possible.

Available Options

     CELL OPTIONS

    • Defrosting waters collecting tray
    • Defrosting waters evaporating tray
    • Castors x 4 (2 with brakes)
    • Mini feet, cell’s heigt 840 mm
    • Stainless steel back sheet
    • Connect easy (toolless core probe connector)
    • Additionnal standard grid holder (the pair)
    • Standard grid holder replacement by reinforced holder (special heavy load), the pair
    • Additionnal reinforced grid holder (special heavy load), the pair
    • Lock
    • Control panel on top( H. + 35 mm)
    • Protection grid against rodent

      CONTROLLER OPTIONS

    • Double display and control (pass-through machines)
    • Thawing mode
    • Pinter + USB output SIMPLY
    • USB option (USB output + 1 supplied key)
    • Additionnal USB key 2 GB / FAT32
    • List management mode (only with USB and/or Printer options)
    • Quick setting mode (only with USB option)
    • 2 probes display
    • 4 probes display
    • Automate SIMPLY III + core probe
    • BI -CONNECT core probe (*connexion to the existing recorder PT100 or PT 1000)
    • BI -CONNECT room probe (*connexion to the existing recorder PT100 or PT 1000)
    • Offset housing enhanced sealing IP65 resin
    • Offset housing enhanced sealing IP66 stainless steel
    • Simply’Touch + 1 key + 1 on/off switch with thermoplastic Housing IP65
    • Option thermoplastic Housing IP65 replacement by stainless stell Housing IP65
    • Software + ethernet com box

     ACCESSORIES

    • Grid GN 1/1
    • Grid GN 2/1
    • Aluminium + silicone plate (non-skid) grid 600 x 400